Baby Pink + After Party + Crystal Clear

 

Products used:

- Glowdip starter set

- Colour: Baby Pink

- Colour: After Party

- Colour: Crystal Clear 

Step-by-step instructions for applying "Baby Pink + After Party + Crystal Clear" Dipping Powder

Materials:

• Baby Pink Dipping Powder
• After Party Dipping Powder
  
• Crystal Clear Dipping Powder
• Base coat
• Activator
• Top coat
• Nail file and buffer
• Dusting brush or soft brush

Preparation

File your nails into the desired shape and gently push back your cuticles.

For optimal adhesion, lightly roughen/match the natural nails with a buffer block or the fine side of a file before application.

Be sure to remove invisible cuticle and skin debris as well, to avoid lifting.

Do not apply oils or creams before use.

Step 1: Base coat

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and affect adhesion.

dip fully into “Baby Pink.” Tap off excess powder and gently brush away loose particles. Apply a second thin layer of base coat and repeat the dip into “Baby Pink” to build an even, smooth base color. Brush clean and allow the layer to set before moving on to the design.

Once the base is complete, apply a fresh thin layer of base coat to the nail and allow it to stay tacky. Using a small, soft brush, lightly pick up “After Party” powder and gently pat it onto the center of the nail, concentrating the color in the middle to create a soft aura effect. Use light tapping motions to diffuse the edges so the color fades naturally into the Baby Pink base. Brush away excess powder carefully without disturbing the gradient.

After the aura placement looks balanced, apply a thin, even layer of base coat over the entire nail and dip into “Crystal Clear.” This encapsulates the design, smooths the surface, and gives the aura effect depth while protecting the color underneath.

Be sure to cover the edges well, but do not touch the skin around the nail.

Step 2: Base Coat & Color Powder

Repeat step 1 for optimal coverage, adhesion and beautiful and stunning color intensity.

Step 3: Activator Coat

Apply enough Activator Coat over the entire nail surface, edges and also at the tip. The Activator is the most important step in the application process because it seals and binds the layers to the nail, preventing air bubbles from forming and ensuring long-lasting adhesion. Allow the Activator Coat to dry for at least two minutes.

Step 4: Filing & Polishing

Now you can use the fine side of the file or a buffer to buff away all bumps and imperfections and bring the nails to the desired shape and thickness. It is important to file carefully so that you do not damage the surface and nails.

Step 5: Activator Coat

Repeat step 3. Again, apply enough Activator Coat to the entire nail and its perimeter to seal the layers optimally. Then allow the Activator Coat to dry for at least two minutes. To make sure the Activator Coat is dry, you can clean the surface of the nail with a paper towel after 2 minutes. This is to prevent the Top Coat from curing due to contamination.

Allow 2-3 minutes of waiting time between Top Coat and Activator Coat.

Step 6: Top Coat

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and allow it to dry for at least two minutes.

Step 7: Top Coat

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for 2-3 minutes.

---

And voila! With these simple steps, you will create beautiful, long-lasting nails with the 'Baby Pink + After Party + Crystal Clear' dipping powder. Have fun with your beautiful nails!